2022 New Model Cnc Metal Fiber Laser Cutting Machine For Metal
Originally founded by graduates from Tsinghua University, CHN-TOP
SCI & TECH CO., LTD. is a high-tech enterprise specialized in
diamond tools (PCD, PCBN, MD, ND, CVD) industries, producing high
precision processing equipments (PCD/PCBN tools'grinders, vacuum
brazing machines, laser
cutting and engraving machines, laser processing center). We offer
pre-machining services (PCD/PCBN laser cutting, tools brazing, chip
breaker engraving, lapping and polishing, etc. ), and distribute
world famous PCD/PCBN blanks. Also supply professional consultation
and advanced technical services. We are your only one stop factory
in the field of ultra-hard materials processing with a good
reputation in the global market.
The fiber laser of ZT-JG6S machine adopts the maintenance-free
type, which saves the regular cleaning of the resonator and the
calibration and maintenance of the optical path in the daily use,
the fiber laser cutting machine is more environmentally friendly
and simple and convenient.
Mainly suitable for cutting ultra-hard materials ( PCD, PCBN,
Cemented Carbide, Ceramics). It can also cut some materials that
can not be machined by wire cutting. The cutting surface is fine,
with high cutting speed, precision and working efficiency. It is
more superior than normal YAG pump laser cutting machine by 2
times.
Design Features:
• Marble base table, not affected by temperature and humidity,
stable and not easy to deform.
• Adopts advanced fiber laser module, more stable, more precise,
more durable and
maintenance-free.
• The self-developed laser source, minimum after-sales service
cost.
• High efficiency, high precision cutting, thin cutting kerf, saves
the material.
• 3 times faster cutting speed than YAG, with smaller heat-affected
zone.
• Two axis of the worktable are driven by servo motor, closed-loop
control, repositioning accuracy :s:0.005mm.
• 24 hours working, processing any 2D graphics, software supports
automatic model and manual model, equipped with CCD monitor.
• Z axis step motor drive and A axis as rotary axis, can process
the material with relief angle.
Technical Parameters:
Power supply requirements | 380V50Hz, Five-core four-square power cord |
Working environment | Room temperature 20~40℃, humidity ≦60%, away from oil source |
Cooling Mode of Machine | Adopt dual temperature cooling system , laser cutting head cooled by room temperature water. Laser cooled
by 22℃cooling circulating water, and for manufacturing workpiece
cooled by purify oil-free compressed air. |
Laser Source | Fiber laser |
Duty Ratio | 1~100% |
Frequency | 1-2000 Hz |
Power percentage | 1%~100% |
Four Axis stroke | 300*300*50mm A-Axis 0±30° |
Maximun power output | 3000W |
Positioning accuracy | ≦± 0.005mm |
Repeat positioning accuracy | ≦± 0.005mm |
To ensure the normal use of laser cutting machine, it is necessary
to carry out daily maintenance and maintenance of the equipment;
regularly to the laser heat dissipation system reasonable dust;
regularly to the X axis, Y axis of the limit switch is sensitive.
Daily maintenance and maintenance
1. Check the operation of the laser carefully before turn on daily,
check the equipment button indicator lamp, stop the ammonium button
key switch is not normal.
2. check the circulating water level of water cooler water tank, if
not
added in time.
3. Check protective lens for damage before daily cutting.
4. Clean up the dust and debris inside the worktable after each
shift is completed.
5. After one year of using , the machine tool and worktable should
be adjusted regularly to ensure the cutting accuracy of the machine
tool
If the equipment is not in use for a long time, please apply butter
to the moving parts and rust-prone parts of the machine tool to
prevent rust.
